Air Cooled Condenser for 2HP/3HP/10HP Condensing Unit Cooler Cold Room Walk in Freezer
| Condenser type |
Fin Surface |
Diameter of copper pipe |
Fin space |
Cooling capacity |
Voltage |
| FNH Type |
2~180 sqm |
9.52mm |
2.2mm |
0.6 kW ~ 54 kW |
220v ~ 380v |
| FNV Type |
110~460 sqm |
9.52mm |
2.1mm |
36.3 kW ~ 151.8 kW |
220v ~ 380v |
1. Designed for an ambient temperature of up to 52°C.
2.It can be fitted to many compressors, including Bitzer, and Copeland, Tecumseh compressor.
3.High High-pressureety cut off with manual reset.
4.Axial fan motor, high air flow with low noise.
5.Air cooled condensing unit, high performance and convenient.
6.Over 363 PSI dry nitrogen gas pressure test after completion of the piping circuit. no any leak.
I7.nstalling of condenser is not confined by area ,it only needs small area.
8.Condenser is entire installation,beautiful outlook design ,protect well ,can avoid collision damage
9.Condensers have double arrangement,avoid heat loss during the air transform
10.The condensers have good protection system inside ,good for reducing maintance
11.Condenser use axial fan motor ,low noise ,power lose and large in air flowing
12.Large power of compressors driver quantity of cooling capacity.
13.Well construction ,convenient packing and transport for condenser.
1.we take very strict inspection for each product before shipping ,and the soldering by our professional and experienced workers ;
2.Casing material can be Galvanized sheet,Stainless Steel, Aluminum and Galvanized coating aluminum etc material .
Q: Do you accept customization?
A: Since we are a factory, we accept customer's customization. If you need to use your brand, please provide the AI/PSD source file of the brand logo.
Q: What is the minimum order quantity?
A: Hello, all our products MOQ is 1 piece. All products can enjoy factory price.
Q: Can you provide samples?
A: Hello, most of our products can provide samples. Sample fee and shipping fee will be paid by customer. Panel samples can be provided free of charge. Shipping is paid by the customer.
Q:Are you a manufacturer?
A:OnlyKem is a professional cold storage manufacturer. We have been engaged in the design and production of cold storage for more than 15 years.
Q:What is the payment method?
A:We accept bank transfer, credit card, LC at sight and other common payment methods. 50% deposit to start production, balance payment before delivery.
Q:How long is the warranty?
A:Warranty is 12 months. However, we will provide timely maintenance suggestions and spare parts support for all the problems that have occurred in the cold storage of our customers these years.
Q:What kind of technical support can you provide?
A:Both our sales and engineers can provide 24 hours online support. Panels are supplied with installation drawings. Installation manuals and electrical diagrams are included with the cooling system. Accessories support is available for all of our products.
Q:Can you send an engineer to the site to install?
A:At present, due to the epidemic, the cost of our engineers going abroad is too high. Returning from abroad requires up to 14 days of quarantine. We recommend that it is more cost effective to find a refrigeration engineer locally. We can provide full online technical support.
Q:Is the condensing unit noisy?
A:We have very quiet options, scroll compressors and rotary inverter compressors are very quiet. It is very suitable for cold storage such as supermarkets and beer houses.
Q:How long is the lead time?
A:Usually for units we need 35 days to produce. If it is a special voltage of 60hz, the production time needs to be extended by 5-10 days. Panels and other things usually we need 7-20 days depends on amount.
Q:What compressors do you use in your refrigeration equipment?
A:We are partners with Bitzer, Copeland, so the main compressor brands are Bitzer and Copeland, but in order to meet the needs of different customers, we can also provide different options such as Tecumseh, FuSheng, etc.
Audited Supplier 
1. Designed for an ambient temperature of up to 52°C.
){kind=link}
){kind=link}