Customization: | Available |
---|---|
Type: | Evaporated Cooled |
Freezing Time: | 30~90 Min |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
IQF freezer for shrimp bread meat fruit vegetable
Main parts of IQF freezer for shrimp bread meat fruit vegetable.
Specification of Conveyor belt: | |||
Conveyor belt width |
850mm |
Effective width |
780mm |
Material |
SUS304 spring hard wire 1.5mm |
Wear rod |
Plunger 5mm, cap bead hot press forming, fixed by welding method |
Conveyor belt link |
The thickness of the links on both sides is 3mm, and the left and right baffles are 15mm high. SUS304 |
Conveyor belt mesh |
The center distance of the mesh is 9mm. Can be placed directly on the mesh belt to freeze |
Spiral layers |
17 layers |
Height between layers |
200mm (net height 160mm) |
Conveyor total length |
296m |
Diameter |
Φ3200 |
Feed rack |
In feed 1.5m Out feed 0.5m |
In feed way |
In feed and out feed at same side. |
In feed height |
880mm |
Out feed height |
4048mm |
In feed and out feed time |
30-90min |
Conveyor belt moving |
Chain drive, frequency control |
Insulation panel for IQF freezer for shrimp bread meat fruit vegetable
Note:
1. The capacity of spiral freezer is based on freezing chicken. Loading density: 5.5kg/m2, in feed temperature: +50, out feed temperature: -18,freezing temperature:-35±2.
2. Depending on the different products, the freezing time can be adjusted
3. Refrigerant capacity is counted on the base of +35 condensing temperature and -42 condensing temperature.
4. The technical parameter can be design nonstandard depending on the freezing food
Refrigeration unit for IQF freezer for shrimp bread meat fruit vegetable.
FeaturesCompact structure
Adopted multilayer spiral structure, it is 1/3 to 1/2 smaller than other freezing equipment which with same
quantity.
Reasonable design and run safely
Based on the experience of many years and overseas advanced techniques, the structure of the
freezer is design reasonably. With the double protecting such as mechanical electric, the freezing
runs safely.
Easy to use
Direction od in feed and out feed can be selected according to the customer's requirements.
Especially forthe different foods product line.
Easy to maintain ans washing
It is no especial technique in operating the equipment, by simple cultivating. The evaporator tubes and fins are all made by aluminum alloy.
The large fins, which easy to clean, assure the hygiene requirement. The convey net belt are
cleaned strongly by water pump and dried by high pressure fan. The stainless steel water slot,stainless steel water pump,high pressure fan with stainless steel enclosure and fan leaves ensure no pollution ne the net belt. Even it has a large space and with less damageable part.
Extensive are for frozen food
Flour foods,vegetable rolls, spring rolls, vegetable, fruits and meat food, frys and other little
package foods..
Stainless steel structure
Completed stainless steel structure, the high strength mesh belt is made from SUS304 stainless
steel. The product can be put on the belt directly to freeze with no belt's marks. There are baffle
fixed on both sides of the belt's chain which can prevent the products or trays dropping from the
belt.
Special air flow design
The design of the spiral tower and baffle plates outside the evaporator is a symmetrical and smooth cycles air flow, which enhances the product heat exchange efficiency and ensure cool air
cant't lose from the entrance of the in feed and out feed. Further more, the operator can enter into
the cabinet to check the running condition when the equipment was running.
Sandwich isolation panel
The body is adopted polyurethane sandwich isolation panel with stainless steel sheet metal.
The door has double seal rods and equipped with heater for opening the door easier.
Reliable convey control
The spiral convey has adopted the America advance technology and run reliably. The net belt is
controlled by transducer. And the speed of it can be adjust . The stainless steel electrical control
box, inside temperature digital and electrical components are all manufactured by France
Schneider Company. The feature of it is reliable.
Big trough in the bottom for draining easily
The bottom with 3mm stainless steel board made of tank. That is easy for cleaning and draining.